> In message <4.1.19981123131059.00b2a9b0@mail.rdr.net>, RTS writes:
> >
> >I have several class C's floating around my net.
> >
> >I was wondering the IP address on a PM2 or PM3 can be from one class C and
> >the IP pool be from a different classs C ???
> >
>
> Yes ;)
LOL, short and sweet...
Most times if your main router is on a separate /24 then you'll need to
set your routes.
Like I use a OR-HS for frame relay that is on a x.y.9.zzz and I'm routing
x.y.10.252-255 to it, which is a static route set into our cisco.
Remember that and you're fine... Otherwise correct OSPF setup and you're
good to go.
-- Aloha from Paradise,Sherwood
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>