atx2
This will force the modem to do x2, even if the phone lines don't support
it, and even if your PM3 doesn't support x2. As an alternate, you can issue
this command. It won't work on all Telepath x2 modems, though. Some of them
need to be upgraded.
atv90
You also might want to issue the following command
at&w&w1
This will write the new settings into the NVRAM, so that next time the
modem is reset, it will remember this setting, and connect with the new
wonder-speeds.
At 12:05 AM 7/24/98 +0000, you wrote:
>PM3 - 3.8b15
>Telepath for Windows with x2. (Don't think it is flashed v.90).
>Connect speed only 31k.
>
>What is the init string to force it to 56K?
>
>
>--
>Lawrence Blades
>Clarksdale Online, Inc.
>P.O. Box 673
>121 Issaquena Avenue
>Clarksdale, MS 38614
>601.627.5554
>http://www.clarksdale.com
>lrblades@clarksdale.com
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
--Mark Zedwick ProAxis Technical Support ------------------------------------------------------------------------
"Minds are like Parachutes. Open or closed, they only function if you use them."
-Me - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>