I've just found something very strange (at least:to me!)
Freiburg-1> show line0
---------------------- line0 - E1 Primary Rate ISDN ---------------
Status: UP F1 Framing: CRC4 Encoding: HDB3 PCM: a-law
Violations
-----------------------------
Bipolar 0
CRC4 0
E-bit 0
FAS bit 0 =20
Freiburg-1> show s0
--------------------- Current Status - ISDN Port S0 ------------------------
Status: NO-SERVICE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ Disconnect:
Active Configuration Default Configuration (* =3D Host
-------------------- --------------------- Can=
Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
Login Service: Rlogin Rlogin
Line Speed: 64000 64000
Hosts: default
Terminal Type:
Login Prompt: $hostname login:
Dial Group: 0
Directory No: =20
So, line0 looks perfect, but NO-SERVICE anyway?
D Ports State Change Start Up Down Time Sess In Out =
Err
-- ------- --------- ------ ----- ----- ----- ----- ------ ------- -------
----
0 Initial 6 0 0 0 0 0 0 0
0
D-Channel seems not to come up...
set debug isdn-max shows no output at all...
I guess it's a telco issue, but I think it's strange anyway...
Mit freundlichen Gr=FCssen
P. Kormann
DataComm (Schweiz) AG
Projektleiter Technik
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>