Re: (PM) "Set register" values

Thomas C Kinnen (tom@lcp.livingston.com)
Wed, 22 Jul 1998 08:53:29 -0700

>I've got a PM2 that's gone wonky, and I need to clear out the flash RAM
>real well, then try a netboot. My "archives" show that the command
>"set register 0xffff 0x0102" will completely wipe the flash RAM. Is this
>correct? are there other values that will do a more/less thorough job?
>Thanx!
>

On the newer ComOS you can 'erase all-flash' and the upload a new ComOS.
Before you do this you may want to make sure you have an tftp server set up
and a terminal that can hook up to s0. If there are any problems you will
need them.

Tom

----
Thomas C Kinnen - <tom@lcp.livingston.com>
[Test Engineer - Radius ABM] - LUCENT Technologies RABU
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>