Re: (PM) PM3 Analog Call

Thomas C Kinnen (tom@lcp.livingston.com)
Mon, 20 Jul 1998 17:05:22 -0700

>I am trying to make a analog call with a PM3. When I use a location I have
>to set analog on for the location, and that works. When I telnet to the
>modem port and then dial-out with an ATDT the modem seems to be trying to
>use ISDN. How can I set the modems in the PortMaster 3 to make an analog
>call when I telnet into the modem? Is there an AT command?
>

I'll pretend you just joined the list this afternoon (my time) as two people
have answered that question today <G> :).

http://www.livingston.com/tech/docs/command/async.fm.html

at&n-Unrestricted 64Kbps data connection.
at&n0-3.1KHz audio service. On a PortMaster 3, use this command to place a
modem call.
at&n1-Speech service. On a PortMaster 3, use this command to place a modem
call.
at&n55-3.1KHz audio service.
at&n56-Restricted 56Kbps data connection.
at&n64-Unrestricted 64Kbps data connection.

Tom

----
Thomas C Kinnen - <tom@lcp.livingston.com>
[Test Engineer - Radius ABM] - LUCENT Technologies RABU
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>