Re: (PM) NEW PM3 won't connect at 56k speeds???

John Vozza (john@netrom.com)
Mon, 20 Jul 1998 12:40:09 -0400 (EDT)

Based on my experiences with Seimens switches and Bell Atlantic I'm
willing to bet you that your CT1 is NOT a trunkside CT1.

This means there is an extra level of D/A then A/D conversion going on in
the Telco CO making 56K type connections next to impossible.

BTW Seimens switches can do PRI with the proper software upgrade (telco
side) but all reboots of the PM3 MUST BE cold boots!!! (Warm boots cause a
problem with the Seimens switch that requires the telco side to do a
re-config so watch out, get to know your provisioning people)

John
-------------------------------------------------------------------------
NetRom Internet Services 973-208-1339 voice
john@netrom.com 973-208-0942 fax
http://www.netrom.com
data lines: (973)208-2536 (973)208-7777 (973)728-1274 (973)835-1111
-------------------------------------------------------------------------

On Mon, 20 Jul 1998, Mia's Virtual Post Office wrote:

> Hi, I have a new PM3 2T, ComOS 3.7.2c3, ComOS 3.8b15, ComOS 3.8b17 are
> all the OS's I have tried in sucession, and am currently at ComOS 3.8b17.
> I have one CT1 in Line0. I cannot seem to establish a 56k connection
> from a know working location with a Zoom, and Supra KFlex modems. I can
> however call my other PM3 ComOS 3.8b15 or b17 with a CT1, and connect
> sucessfully between 44k, 48k, and 50k, with both modems from the same
> location. The CT1 on the new PM3 is a a FX,(we are backhawling the
> trunks 6miles to our location. The switch is a Semens. The working CT-1
> is a Remote 5e with 5 repeaters, and works great. Below is the line0
> from the nonworking 56k connect PM3 and the working one. whats going on?
>
> Does not work (seimens switch)
> ---------------------- line0 - T1 Inband DS0 ---------------
>
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> Signaling: Trunk E&M wink start
>
> Receive Level: -7.5dB to -15dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> Blue 0 Bipolar 362
> Yellow 0 CRC Errors 1218
> Receive Carrier Loss 1 Multiframe Sync 46
> Loss of Sync 3
>
> Command>
>
>
> Works great (remote 5e)
> ---------------------- line0 - T1 Inband DS0 ---------------
>
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> Signaling: Trunk E&M wink start
>
> Receive Level: -7.5dB to -15dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> Blue 0 Bipolar 29241
> Yellow 1 CRC Errors 1159
> Receive Carrier Loss 2 Multiframe Sync 352
> Loss of Sync 43
>
> Ameritech, Our Link To Disaster
>
> "On a day no different than the one now dawning, Leonardo drew the first
> strokes of the Mona Lisa, Shakespeare wrote the first words of Hamlet, and
> Beethoven began work on his Ninth Symphony." And Windows98 Crashed!
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>