>
> below is my problem. I just had a customer bring their computer system in,
> and he gets disconnected about every 3 mintues from the pm3. The modem is
> a "modem master 6000/33.6" and uses a no-name chipset. It works fine on
> our pm2 hunt group with our sportsters/couriers. We have also had misc.
> problems with other modems, including, TI chipsetted 56K modems. We have
> many disconnect problems, and also problems with throughput as i've mailed
> to the list before. I have posted some cut and paste from the pm3 here. If
> anybody could please take a look at what we have here, this is basicly an
> out of box unit and not many major changes. We have tried both 3.8b17 and
> 3.8b15. Our telco is US West and uses a 5ESS Switch. This is over a
> channelized T1.
[..output snipped]
Well what modem (mX) was/is the user connected to? Unfortunately the sX
outputs don't seem to match the "show modems" output so I can't match them
up.
Also, have you ever ran 3.7.2c3 on this PM-3 with these same users and
what were the results?
-jr
----
Josh Richards - <jrichard@livingston.com> - <josh@lucent.com>
[Beta Engineer] - LUCENT Technologies - Remote Access Business Unit
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>