Re: (PM) PM3 opinions

Thomas C Kinnen (tom@lcp.livingston.com)
Wed, 8 Jul 1998 16:43:24 -0700

>- Terminate a PRI for ISDN and v.90 dialin (24 modems).
>- Terminate a Point to Point T1 for IP traffic between a remote office
>and the POP.
>- Route IP traffic between the modems, the LAN, and the remote office.
>(Internet traffic from the modems and remote office will be sent to a
>seperate router on the LAN through the portmaster).
>
> Internet <---->LAN<------
> |
> v
>1 or 2 PRIs for dialin<----> Portmaster <--->PtP T1 from remote office
>

The PM3-2T can handle this with no problems. You can use one T1 port for
dial in and one for ptp. When you are ready to add the extra lines for dial
in move the ptp to the wan card (Or if you are sure on expanding it might
make more sense to get the wan card to start).

Tom

----
Thomas C Kinnen - <tom@lcp.livingston.com>
[Test Engineer - Radius ABM] - LUCENT Technologies RABU
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>