On Thu, 25 Jun 1998, Mia's Virtual Post Office wrote:
> Date: Thu, 25 Jun 98 18:56:30 -0000
> From: Mia's Virtual Post Office <list@mia.net>
> Cc: portmaster-users@livingston.com
> Subject: (PM) New PM3 question...
>
> Hello, the last PM3 we got in here I booted up via ethernet not the null
> modem cable. Everything went fine, yet I cannot remember exactly how I
> did it. The problem I am having is getting my latest PM3 an IP address.
> I just got the box in today. I tried booting through the PM Console via
> ethernet as I have done before and it was a no go. So I decided to try
> the Null modem cable. I have never been able to get this to work. (hence
> the reason I do it the other way.) I have a null modem cable and have
> connected one end to the CO port on the PM3, I have set the dip switch #1
> Up, I connected the other end of the null modem cable to my PC's serial
> port(printer port, I assume) I have tried every terminal program I can
> think of and find none that will work. I assume I need to set my
> terminal program to LPT1 not one of the COM ports as this null modem
> cable is plugged into the serial port not a com port. Can anyone
> recommend the best way to get an IP on the unit so I can configure it?
> Also, if I have to use the null modem cable and terminal program setup,
> what term program should I be using? Thanx in advance...
>
>
>
> Ameritech, Our Link To Disaster
>
> "On a day no different than the one now dawning, Leonardo drew the first
> strokes of the Mona Lisa, Shakespeare wrote the first words of Hamlet, and
> Beethoven began work on his Ninth Symphony." And Windows98 Crashed!
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>