Re: (PM) New PM3 question...

Scott Carpenter (scarpenter@assuredaccess.com)
Thu, 25 Jun 1998 17:10:13 -0700

> I connected the other end of the null modem cable to my PC's serial
>port(printer port, I assume) I have tried every terminal program I can
>think of and find none that will work. I assume I need to set my
>terminal program to LPT1 not one of the COM ports as this null modem
>cable is plugged into the serial port not a com port.

a serial port is a com port.
ie. serial 1 = com1
serial 2 = com2
and so on.....

You can just use hyperterm on windows or any other terminal. The settings
should be 9600,8 none 1, and flow control should not matter but I use xon
xoff or none.

Scott
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>