Problem - Users on the sub offices cant get throuh
the PM. Routers logs on, but the IP pacage can't get thru
the PM.
I think it is a routing problem..
We use IP/RIP
I have to send in traffic both way's.
We don't use Radius, but the Portmaster's own user table.
We have a cisco 1003 router as a default gateway to
Internet IP 195.78.186.34 255.255.255.240 from PM.
Dns server is 195.78.186.33 / 193.71.1.2
Mail server is installed on 195.1.186.33
We use lan nett 195.78.186.32 255.255.255.224
PM is connected to ether0 195.78.186.54
Ip Wan connections i will use: 195.78.186.144 255.255.240
Ip Pool 195.78.186.146 Pool=10
I have 10 small office routers (cisco 765) around in
Norway. They use localy as an example ip 195.78.186.176
255.255.255.248 or 195.78.186.160 255.255.255.240
The router use the furst avaible address in the area.
(195.78.186.177 - 195.78.186.161 as lan IP)
I will prefer to use unumberd routing to incraese the use
of IP addresses.
Routing on default gateway (195.78.186.34).
195.78.186.196 255.255.255.248 195.78.186.54
195.78.186.144 255.255.255.240 195.78.186.54
Routing on PM
0.0.0.0/0 195.78.186.34
195.78.186.32/27 195.78.186.54
Rest ?
Routing on PM "table netmask"
195.78.186.0 255.255.255.248
195.78.186.8 255.255.255.248
195.78.186.32 255.255.255.242
195.78.186.144 255.255.255.240
195.78.186.176 255.255.255.248
Routing on Cisco 765
Lan address 195.78.186.177 255.255.255.248 /routing on /rip off
? 0.0.0.0/0 195.78.186.54 and I have tried
? 0.0.0.0/0 0.0.0.0
If i have to use OSPF, I have red in the Config guide
that you can set up only 8 ranges for eatch area.
Is it possible to show me how I use OSPF with the
example i have explained (With 10 or more sub offices)
Rolf
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>