RE: (PM) Line1 to Line1 (or maybe just a dumb question)

Mark Radabaugh (mark@amplex.net)
Tue, 23 Jun 1998 18:43:17 -0400

>
>If the T-1 between the two units is a frame-relay circiut you're OK.

It's a plain old leased line. I am not sure how the existing CSU at the
far end is set up.

>Another possibility, is that if either of the PM3s is connected to a telco
>circuit (PRI, CT1, FR, etc.) on line0 and the two are connected together
on
>line1, then the PM3 may use the clocking on the line0 side for the whole
>box. Check with Livingscent to be sure on this.

The Line0 on one box is a CT1 with one telco and the Line0 on the other box
is a PRI from a second telco. I have a ticket open with Livingston but
didn't hear back today.

>-- Jay Hennigan jay@west.net 805-884-6323 --
>WestNet: Internet service to Santa Barbara, Ventura and the world.

Thanks, Jay.

Mark Radabaugh
mark@amplex.net
(419) 833-3635

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>