<snip>
>
> Frame Relay comes up I see the status enq messages and the
> DLCI advertisment (DLCI 16 on Cust, 23 on ISP side)
> Frameing is ANSI-ANNEX-D on both ends, Cisco is set
> as follows
>
> interface Serial1/2
> no ip address
> encapsulation frame-relay IETF
> !
> interface Serial1/2.15 point-to-point
> description CUST-0132-FR-128-30
> ip address 207.214.67.53 255.255.255.252
> bandwidth 128
> frame-relay interface-dlci 30 IETF
--------
You state that the customer comes in on DLCI 23 on your end, but your
sub-interface is directing traffic to DLCI 30.
-- Kyle Platts Network Engineer !NTERPRISE Networking Services U S WEST Communications - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>