Atomic Networks Customer Support wrote:
>
> Jake,
>
> I've got 4 US Robotics MP-16's (basically 16 Courier modems in a rack
> mount box). My only solution so far is to toggle the power on the modems,
> not the portmaster.
>
> -----Original Message-----
> From: Jake Messinger <jake@ams.com>
> To: Adam Snodgrass <support@atomic.net>
> Cc: portmaster-users@livingston.com <portmaster-users@livingston.com>
> Date: Thursday, 04 June, 1998 17:36
> Subject: Re: (PM) Stuck Modems on PM2E
>
> >On Thu, 4 Jun 1998, Adam Snodgrass wrote:
> >
> >> Hello,
> >>
> >> I am curious if anyone has a way to force a modem to reset from the
> command
> >> prompt of the PM2E. Occasionally, one of the modems connected to one of
> my
> >> PM2E's will hang, and the Portmaster will show it stuck on 'USERNAME'.
> The
> >> modem seems to hold DCD high, and will not respond to a port reset. I
> end
> >> up having to go to the site and toggle the power on the modem bank, which
> is
> >> inconvenient to say the least. The modem banks are USR MP-16's. Any
> help
> >> you can provide will be most appreciated.
-- "To a man with a hammer, everything looks like a nail."Lawrence Blades Clarksdale Online, Inc. 121 Issaquena Avenue P.O. Box 673 Clarksdale, MS 38614 601.627.5554
http://www.clarksdale.com E-mail: lrblades@clarksdale.com - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>