From: Irve Towers <irvet@knight-hub.com>
Date: Sun, 31 May 1998 10:18:23 -0400
Subject: (PM) renegotiation and speed dropping to 24000
Running ComOS 3.8b15
client modems Acer 56kflex, Zoom 56kflex v1.2, Garnet 56kflex, Supra56k
Can someone explain what is going on with the renegotiations and speeds
ending up
at 24000. It occurs with all three of these modems and have gotten the same
complaint
from users, although they just experience the link slowing down because the
client end does not reflect the speed drop. When I look at the port I see
their speed has dropped to 24000 also.
This occurs with as little as 30 minutes of connect time.
This is a sh m0 for a port that has dropped speed. One renegotiation?
Card Type: Lucent Chipset
State: ACTIVE
Active Port: S2
Transmit Rate: 24000
Receive Rate: 26400
Connection Type: LAPM/V42BIS
Chars Sent: 70310677
Chars Received: 8826641
Retrains: 0
Renegotiations: 1
Total Calls: 48
Modem Detects: 48
Good Connects: 48
What gives..? I've updated the firmware on my three to the latest availbale
and have had customers do the same.
This began happening with 3.7 ComOS and stopped happening with 3.7c3, then
reappeared
with 3.8b15.
I realize this is beta code, but can someone tell me whats going on here.
Digitally yours,
Irve Towers
The Hub Internet Services - Washington DC - http://www.knight-hub.com/
Alternate e-mail -> support@knight-hub.com -> webmaster@knight-hub.com
- -
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
------------------------------
From: Henrik Johansson <hj@globecom.net>
Date: Sun, 31 May 1998 14:42:40 +0200 (CEST)
Subject: Re: (PM) renegotiation and speed dropping to 24000
On Sun, 31 May 1998, Irve Towers wrote:
> I realize this is beta code, but can someone tell me whats going on here.
Well, you answer your own question. It's exactly what you say, it's beta
software. The next beta build is supposed to be more stable with more
modem brands etc. Remember, this is the first beta with V.90 support.
Regards
Henrik Johansson
We are running PM-3 ComOS 3.7.2c3 and have been experiencing exactly the
same problem!!
Regards,,Rob.
Rob Merkwitza
Technical Manager
Octa4 Pty Ltd - CODE MEDIA
Darwin, Australia
Phone +61 8 8941 0699
Fax +61 8 8941 0833
support@octa4.net.au
_-*_|\
/ \
\_.--._/
.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>