RE: (PM) Port IP's

Mark Radabaugh (mark@woodville.net)
Mon, 25 May 1998 15:40:08 -0400

They are assigned randomly as you found. Unless there has been a
recent change you can't assign the IP numbers to specific S
ports. If you want a specific IP assigned to a user you can do
so in RADIUS or the USER file.

Mark Radabaugh
Amplex Internet
support@amplex.net
(419) 833-3635

> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On
> Behalf Of Robert Hough
> Sent: Monday, May 25, 1998 3:22 PM
> To: portmaster-users@livingston.com
> Subject: (PM) Port IP's
>
>
> When a user connects to our pm2e, I noticed it assigns
> ip's randomly. I am
> going to assume, I can tell it, what port gets what
> ip, but I dont see it
> anywhere in the docs. So, I assumed it would be like
> adding an ip to the
> ethernet port. Before I try this, I just want to make
> sure this is correct.
> Here's what I *think* I should do... set s0 x.x.x.x,
> set s1 x.x.x.x, etc...
> is this right?
>
>
> -=)> Robert Hough (rch@iserve.net)
> -=)> Computer Specialists, Inc.
> -=)> http://www.csinc.net
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive:
> <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>