RE: (PM) Timeouts (fwd)

Michael Phillips (mike@coosavalley.net)
Sun, 24 May 1998 13:19:57 -0500

|O|-----Original Message-----
|O|From: owner-portmaster-users@livingston.com
|O|[mailto:owner-portmaster-users@livingston.com]On Behalf Of MegaZone
|O|Sent: Saturday, May 23, 1998 10:15 PM
|O|To: PortMaster Users
|O|Subject: RE: (PM) Timeouts (fwd)
|O|
|O|
|O|
|O|Once upon a time Michael Phillips shaped the electrons to say...
|O|>Sat May 23 12:05:55 1998: [4827] Sending Accept of id 26 to pm1
|O|>(207.230.68.3)
|O|>Sat May 23 12:05:55 1998: [4827] Framed-Protocol = PPP
|O|>Sat May 23 12:05:55 1998: [4827] Idle-Timeout = 900
|O|
|O|Ok, it sends the Idle-Timeout value. RADIUS appears to be doing what it
|O|should.
|O|
|O|So how do you know it isn't working? What are you seeing that indicates
|O|users are passing the limit?

See below.....

pm1> show ses
Port User Host/Inet/Dest Type Dir Status Start
Idle
---- --------------- ---------------- ------- --- ------------- ------ -----
-
W1 - - Netwrk Hrd IDLE 0
0
S0 - - Log/Net In USERNAME 0
0
S1 - - Log/Net In USERNAME 0
0
S2 glynch pmt13.coosavalle Netwrk In ESTABLISHED 26
0
S3 jlesser pmt20.coosavalle Netwrk In ESTABLISHED 0
0
S4 mparmaei pmt18.coosavalle Netwrk In ESTABLISHED 1days
2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Here's his radius entry:

mparmaei Auth-Type = Local, Password = "xxxxxx"
Framed-Protocol = PPP,
Idle-Timeout = 900

And here's the output of a show s4:

pm1> show s4
----------------------- Current Status - Port S4 ---------------------------
Status: ESTABLISHED
Input: 79078199 Parity Errors: 0
Output: 381452520 Framing Errors: 31
Pending: 0 Overrun Errors: 0
Modem Status: DCD+ CTS+

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Login/Netwrk (Dial In) (Security)
Baud Rates: 115200 115200,115200,115200
Flow Control: RTS/CTS RTS/CTS
Modem Control: on on
Modem Config: Configured century

Remote Host: pmt18.coosavalley.net creek.coosavalley.net
Netmask: 255.255.255.255 0.0.0.0
Interface: ptp4 (PPP,Quiet,VJ-Comp)
Mtu: 1500 1500
Async Map: L:00000000 R:000a0000 00000000
Dial Group: 0
Login Message: Welcome to Coosa Valley Internet Services.
pm1>

|O|
|O|>Sat May 23 12:05:55 1998: [4816] Acct-Delay-Time = 0
|O|>Is the Acct-Delay-Time = 0 the culprit? If so, can I fix it?
|O|
|O|No. I would encourage you to read the RADIUS Admin Guide, and the RFCs
|O|(2138/2139) to better understand what RADIUS is doing.
|O|
|O|-MZ

Will do so (again in the case of the Admin Guide). Thanks for all the help
MZ.

Mike

----------------------------------------------------------------------------
------------------------
Michael Phillips KF4PFW
System Administrator mike@coosavalley.net
Coosa Valley Internet Services www.coosavalley.net

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>