Re: (PM) Remote POP Management
Lil' Feet (cbissell@frii.com)
Wed, 20 May 1998 16:33:03 -0600 (MDT)
> > I have 2 POP locations that I would like to manage from my location.
> > I'm trying to have some sort of machine that connects to the console ports
> > of the various equipment that make up the remote POP, so that I may telnet
> > to this machine and then console login to the equipment. Has anyone used
> > PM-11's for this purpose, and if so how are the PM-11's configured since
>
> Yes we used/sold dozens of PM 11's specifically for this purpose.
>
> > you can't use the 'attach' command. If you don't use a PM-11 what do you
> > use? Any suggestions would be appreciated.
>
> Set up the device-service as telnet and use ports 10001 and up (security
> telnet ports). or just 6001 and up.
>
> Then you just telnet <boxname or ip number> <port # of the port you want>
The problem is that I'm trying to avoid telneting to the equipment (except
for the pm-11). Several times a machine will not respond for telnet,
however you are able to console login with a serial cable. Is what you
are saying doing this? Perhaps I don't quite understand.
Here is an example of one of our pops with the equipment that I need to be
able to console connect
2 pm3's
1 Cisco 2514
2 CSU/DSU's
1 Remote Power Controller
1 Hub or Switch
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>