>> How is it possible to put filter on ethernet (or on modem) port in PM-10
>> ER. Filters are part of choicenet server.
>>=20
>
>On EThernet is dangerous. As far as I know, you can=B4t have a Choicenet
filter on the same=20
>Ethernet-Interface where the Choicenet-Server is on. This means, you can
only set filters=20
>on ether1 on an IRX211 if the Choicenet server is connected via ether0.
>
>> I have tried with pmconsole, from command prompt but it is only possible=
to
>> set filter which is created on PM not from choicenet server.=20
>>=20
>> I know that it is possible to create filters on PM but I want to use
>> filters from choicenet server.
>>=20
>
>This is kinda difficult for ether0 and leased lines, because the filter
has to exist.=20
>What you can do is create a filter with list-rules in it, like
Yes but in choicenet manual it says that it is possible to put filter on
ethernet interface, or on leased line, but they didn't say how!
By
Mario
-----
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Mario Misic | e-mail: mario@laus.hr ~
~ CC Computer Consulting | Tel: +385 (20) 411-136 ~
~ Janjevska 15 | +385 (1) 6552-330 ~
~ 20 000 Dubrovnik | Fax: +385 (20) 411-136 ~
~ Hrvatska (Croatia) | URL: http://www.laus.hr ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>