(PM) Problem location and dial out on demand (fwd)

MegaZone (megazone@megazone.org)
Tue, 19 May 1998 17:05:56 -0700 (PDT)

Once upon a time portmaster@she.de shaped the electrons to say...
>Dial in works fine, authenticating with radius:
>
>testtest Auth-Type = System
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Address = 193.141.20.9
> Framed-Route = "193.141.20.8/29 0.0.0.0 1"
> Framed-Routing = None,
> Framed-MTU = 1500

You'd be better off using 'set user-netmask on' and setting
Framed-IP-Netmask to 255.255.255.248 - and losing Framed-Route.

>Then I created a location with the same name "testtest", destination
>specified, address 193.141.20.9, netmask 255.255.255.248, With PAP,
>username, password etc. and as type on_demand. Dialing manually works
>fine, the PM3 connects to the customers router and I reach his subnet. But
>dialing on demand doesn't work :-( the PM3 sends the packets for the
>subnet back to his default router and doesn't make a call ...

You probably have a config error. You need to show us the location table,
as well as a 'show route'.

-MZ

-- 
<URL:mailto:megazone@megazone.org> Gweep, author, webmaster, human being, me
"A little nonsense now and then, is relished by the wisest men" 781-788-0130
<URL:mailto:megazone@gweep.net> <URL:http://www.megazone.org/> Hail Discordia!
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>