Re: (PM) Problem location and dial out on demand

portmaster@she.de
Tue, 19 May 1998 17:16:33 +0200 (CEST)

On Tue, 19 May 1998, Stephen Zedalis wrote:

> Date: Tue, 19 May 1998 10:54:07 -0400 (EDT)
> From: Stephen Zedalis <tintype@exis.net>
> To: portmaster@she.de
> Cc: portmaster-users@livingston.com
> Subject: Re: (PM) Problem location and dial out on demand
>
> On Tue, 19 May 1998 portmaster@she.de wrote:
>
> >So, in the Command Line Administrators Guide I understandd "on_demand"
> >that the PM3 dials out to the specified location when packets destination
> >is the customer.
> >
> >Where is the mistake in my thoughts??
>
> Your mistake is thinking the route exists BEFORE the link comes up. (It
> doesn't because the Framed-Route and RADIUS entry come into play on
> dial-in only and only after connection) BEFORE the link comes up, the PM
> has no choice but to send the packets to its default router (unless they
> are intended for the router itself) because it has no specific route for
> the subnet. If you want to do on_demand and have it go to the right place
> you will need a static route for the subnet and point the entire subnet to
> the gateway IP address in the location entry.
>
>

I have a routing entry for the subnet:

show route
Destination Mask Gateway Source Flag Met Interface
----------------- ---- -------------------- ------- ---- --- ---------
0.0.0.0 0 193.98.91.2 local NS 1 ether0
194.141.20.8 29 194.141.20.9 local NL 1 ptp32
193.98.91.0 25 193.98.91.54 local NL 1 ether0

I think they are created from the location entry, because I did not added
it manually.

If I add manuelly an routing entry for this subnet, I get the following:

add route 193.141.19.8/29 193.141.19.9 1
Warning: Gateway is not directly connected - marking as Unknown
Route entry successfully added
portmaster> show route
Destination Mask Gateway Source Flag Met Interface
----------------- ---- -------------------- ------- ---- --- ---------
0.0.0.0 0 193.98.91.2 local NS 1 ether0
194.141.20.8 29 194.141.20.9 local NL 1 ptp32
193.98.91.0 25 193.98.91.54 local NL 1 ether0
193.141.20.8 29 193.141.20.9 local NS 1 Unknown

and the Interface is "Unknown" ?

Regards,
Ralf Naegele

------------------------------------------------------------------------
Ralf Naegele _/_/_/ _/ _/_/_/
Softwarehaus Engelhardt GmbH _/ _/ _/ Phon: +49 621 5953200
Donnersbergweg 1 _/_/ _/_/_/ _/_/ Fax: +49 621 5953201
D-67059 Ludwigshafen _/ _/ _/ _/ eMail: naegele@she.de
Xlink-PoP LU/HD/KL/DA _/_/_/ _/ _/ _/_/_/ http://www.she.de/
------------------------------------------------------------------------

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>