(PM) Info email only

Robert Hough (rch@iserve.net)
Fri, 15 May 1998 19:18:26 -0500

I'm sure this has been brought up a millions times, and I apologize in
advance for bringing it up again. Anyways... I have email only filters
working when checking mail just fine. However, on sending mail,it takes at
least 30 seconds before it can find the host in order to send out. I
thought maybe this was just normal lag, but I tested it with an account
that didn't have the filter in place. Everything went through fine. Does
anyone know what would cause such a dramatic hit to the performance? Here's
the filter set I used, is there something wrong with this, or a better way
to go about it? Any help would be appreciated.

mailonly.in
1 permit 0.0.0.0/0 0.0.0.0/0 udp dst eq 53
2 permit 0.0.0.0/0 0.0.0.0/0 tcp dst eq 25
3 permit 0.0.0.0/0 0.0.0.0/0 tcp dst eq 110
4 permit 0.0.0.0/0 0.0.0.0/0 tcp dst eq 113
5 permit 0.0.0.0/0 0.0.0.0/0 udp dst eq 113
6 permit 0.0.0.0/0 0.0.0.0/0 icmp

mailonly.out
1 permit 0.0.0.0/0 0.0.0.0/0 udp src eq 53
2 permit 0.0.0.0/0 0.0.0.0/0 tcp src eq 25
3 permit 0.0.0.0/0 0.0.0.0/0 tcp src eq 110
4 permit 0.0.0.0/0 0.0.0.0/0 tcp src eq 113
5 permit 0.0.0.0/0 0.0.0.0/0 udp src eq 113
6 permit 0.0.0.0/0 0.0.0.0/0 icmp

-=)> Robert Hough (rch@iserve.net)
-=)> Computer Specialists, Inc.
-=)> http://www.csinc.net

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>