RE: (PM) Error message on a PM-2

sbourne (sbourne@livingston.com)
Thu, 14 May 1998 12:25:46 -0700

I have seen this on my PortMaster when the modem fails to maintain a fixed
baud rate. As it turned out, the modem (a Supra 33.6 FAXModem) was
dropping the DTE to DCE rate to match the connect rate. Once I corrected
the initialization string to force a fixed DTE-DCE rate, the poblem
stopped.

Interestingly enough, the default PM Supra init string used the factory
defaults (at&f2), which WERE NOT set for fixed DTE-DCE rate.

Steve

-----Original Message-----
From: Mihai Ibanescu [SMTP:misa@dntis.ro]
Sent: Thursday, May 14, 1998 3:18 AM
To: portmaster-users@livingston.com
Subject: (PM) Error message on a PM-2

Hello

Does anyone know what this means?

May 13 22:52:43 portmaster error: port S29 spurious interrupts

Any hint would be appreciated.

Best wishes,
Mihai

Mihai Ibanescu Dynamic Network Technologies
http://sysadm.dntis.ro/~misa Moara de Foc 35, et. 7, 6600 Iasi
misa@dntis.ro tel. +40-32-252936

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>