> I cant for the life of me figure out why I cant get an ascend p50 to
> connect to my pm3 with more than one channel. I have it set to MP and not
> MPP, version is 6.02. Let me post the debug info.
>
> Here is the radius entry
>
> customer Password = "password"
> Port-Limit = 2,
> Idle-Timeout = 0,
> Session-Timeout = 0,
> Framed-Address = 209.4.50.113,
> Framed-Route = "209.4.50.112/28 209.4.50.113 1"
>
> Here is the ascend debug info
[..]
> Here is the PM debug info
[..]
The PPP debug output would be more useful...do a "set debug 0x51" and run
it through the decode on our web site under debug tools.
-jr
----
Josh Richards - <jrichard@livingston.com> - <josh@lucent.com>
[Beta Engineer] - LUCENT Technologies - Remote Access Business Unit
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>