Re: (PM) Frame Relay problem.
Kyle Platts (kwplat1@uswest.com)
Tue, 12 May 1998 08:46:30 -0500
Murat Balci wrote:
>
> Hi,
>
> We have a PM3, v.3.7.2. One port is used for ISDN connections, and the
> other E1 port is used for Frame Relay connectin (or will be used).
> Unfortunately there is a problem in Frame Relay connectin.
>
> Configuration is as follows:
>
> ----------------------- Current Status - Port W32
> ---------------------------
> Status: ESTABLISHED
> Input: 54560 Abort Errors: 0
> Output: 263152 CRC Errors: 3314
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD+ CTS+
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Netwrk Netwrk (Hardwired)
> Line Speed: Ext 2048K Ext Clock
> Modem Control: on on
> Local Address: 194.54.59.32 194.54.59.32
> Netmask: 255.255.255.252 255.255.255.252
> Interface: frm32 (FRM,Listen) (FRM,Quiet)
> Mtu: 1500 1500
> Dial Group: 1
> Annex-D Poll: 15 (seconds)
What is the carriers switch set to? Specifically what is their t392
timer set at?
In our network, we expect polling every 10 seconds and we give the user
15 seconds to get the poll in. I suspect that both you and the switch
might be set to 15 seconds.
Anyways, this is the first thing I would check.
--
Kyle Platts
Network Engineer
!NTERPRISE Networking Services
U S WEST Communications
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>