Word of warning. Ascend's software upgrade process is not one to take
lightly. Your software image depends on your serial number in many cases
and you must NOT upgrade directly from some releases to others or you will
"cook the router" (quote from Ascend tech support).
To do it correctly you also need a tftp server becuase the images are too
large for the serial port connection (nice design guys). If you have not
upgraded one of these before, I recommend calling Ascend tech support and
letting them help. Expect a two hour hold time on their support line, but
it will be worth it in the long run. Or so Ascend tech support suggests.
Alex
I-Link USA
-----Original Message-----
From: Scott Lagos <slagos@net1plus.com>
To: portmaster-users@livingston.com <portmaster-users@livingston.com>
Date: Wednesday, May 06, 1998 5:30 PM
Subject: (PM) PipeLine 50/75 to PM3
>We are trying to assist a client in connecting to our PM3 ComOS 3.8b15,
>dual CT1 with two B channels for a 112K.
>
>We have another client using a 3Com and then are getting the connection on
>two channels fine. We cannot seem to get this PipeLine user to connect
>with more than one channel.
>
>Under the Connection profile we have made sure that ENCAPS is MPP and the
>endcap options are set for Base=2, Min=2 and Max=2.
>
>We have also made sure that the RADIUS profile for this user is the same as
>the user using the 3COM/USR.
>
>I thought I had seen references to this issue in previous threads but did
>not see them on Livingstons site.
>
>Any help would be appreciated.
>
>Thanks in advance.
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>