On all but one of these, we got it to work "out of the box" running CHAP
both ways and Encaps=PPP on the PL. On *one* of the boxes (which as far
as I can tell is set up identically both on PM and PL side, except for
IP addresses), this didn't work. We got connected, but no routing
whatsoever, and debug output on the PM2 showed LCP_CONFIGURE_REJECT on
Multilink protocol. Setting "multilink on" on the location and changing
to Encaps=MP on the PL "fixed" it. Strange, but it works ;)
-tsb
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>