Huge
On Mon, 4 May 1998, Josh Richards wrote:
> On 4 May 1998, CYGNET Support wrote:
>
> > To follow this up. I have a PM3 latest COMOS b15 with no ISDN coming into
> > this box and it just rebooted. The release notes did state that the ISDN
> > issue was fixed however. Anyone else seeing reboots with similar config.
>
> You are going to have to elaborate more than that. We most definitely
> have users using PM-3s without ISDN (PRI I assume you mean). Put a
> terminal, serial printer, or whatever is your preference onto the console
> port (C0) and see if there is any output over the period of time until the
> box reboots (and at the moment it reboots of course). You *must* be on
> the C0 port to get any crash output, a "set console" will not suffice.
>
> --jr
>
> >
> > Huge
> >
> > On Mon, 4 May 1998, CYGNET Support wrote:
> >
> > > Was the latest COMOS supposed to fix the PM3 reboot problem??
>
> ----
> Josh Richards - <jrichard@livingston.com> - [Beta Engineer]
> LUCENT Technologies - Remote Access Business Unit
> (formerly Livingston Enterprises, Inc.)
> http://www.livingston.com/
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>