Where am I screwing up!? An assist would be greatly appreciated.
Thanks
Noel
This is the radius entry:
userx Auth-Type = System,
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-Routing = None,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP
this is an example of the configuration of the ports on the pm2:
----------------------- Current Status - Port S1 ---------------------------
Status: IDLE
Input: 22882 Parity Errors: 0
Output: 15810 Framing Errors: 1
Pending: 0 Overrun Errors: 0
Modem Status: DCD- CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
Baud Rates: 115200 115200,115200,115200
Parity: none none
Flow Control: RTS/CTS RTS/CTS
Modem Control: on on
Modem Config: Configured isporte
Terminal Type:
Dial Group: 0
Here is the global configuation of the PM2:
sh global
System Name: Nashua-PM1
Default Host: Gandalf.INR.Net
Alternate Hosts:
IP Gateway: 207.121.124.1
Gateway Metric: 1
Default Routing: Quiet (Off)
Name Service: DNS
Name Server: Gandalf.INR.Net, 207.121.124.16
Domain: INR.Net
Telnet Access Port: 23
Loghost: Gandalf.INR.Net
Maximum PMconsole: 1
Assigned Address: 207.121.125.1
RADIUS Server: Gandalf.INR.Net
Alternate Server: 0.0.0.0
Accounting Server: Gandalf.INR.Net
Alt. Acct. Server: 0.0.0.0
PPP Authentication: PAP: on CHAP: on
Disabled Modules: SNMP OSPF BGP
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>