I just brought up two CT1s (all PRI til now), and I'm seeing
disparities all over the place. Like this session ... I tell the
modem not to go over 40k, it reports connecting 40k/LAPM, the PM
immediately says 44k/LAPM, and radius logs 44k/MNP:
at&f&k3s202=32+ms=56,1,34000,40000w1dt3527001
CARRIER 40000 <---
PROTOCOL: LAP-M <---
CONNECT 115200
login: !root
Password:
ncpm3> sh m0
State: ACTIVE
Active Port: S1
Transmit Rate: 44000 <---
Receive Rate: 24000
Connection Type: LAPM/V42BIS <---
Chars Sent: 3407161
Chars Received: 435115
Retrains: 0
Renegotiations: 0
Thu Feb 26 23:52:01 1998
Acct-Session-Id = "0E00000D"
User-Name = "!root"
NAS-IP-Address = 198.69.28.133
NAS-Port = 1
NAS-Port-Type = Async
Acct-Status-Type = Start
Acct-Authentic = Local
Connect-Info = "44000 MNP/NONE" <----
Service-Type = Administrative-User
Acct-Delay-Time = 0
ncpm3> ver
Livingston PortMaster PM-3 ComOS 3.7.2c3
System uptime is 4 hours 54 minutes
AMI/D4 CT1 from a DMS10 provisioned "per Kyle"
My PRIs do not show such discrepancies when called by the same modem.
They show minor disagreements: the PM sometimes shows a connect speed
2k lower than what the modem shows.
-- Dick St.Peters, stpeters@NetHeaven.com Gatekeeper, NetHeaven, Saratoga Springs, NY, 1-800-910-6671 (voice) Saratoga/Albany/Amsterdam/BlueMountain/Cobleskill/Greenwich/ GlensFalls/LakePlacid/NorthCreek/Plattsburgh/... First Internet service based in the 518 area code- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>