1 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 513
2 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 138
3 permit 0.0.0.0/0 0.0.0.0/0 ip
Regards,
Rod
> -----Original Message-----
> From: Fernando Martin [SMTP:marferfe@i2000.es]
> Sent: Thursday, February 26, 1998 11:25 AM
> To: portmaster-users@livingston.com
> Subject: (PM) ISDN ondemand problems
>
> Hi all,
>
> First I must to explain that I have two OR-ST version 3.5L to connect
> two
> offices. One of them is the central ( Dial -in) the other one is the
> remote
> office ( dial-out).
>
> The firts one is configurated for only dial-in:
> - S1 and S2 port Dial-in
> - No table location
> - NO gateway
> - IPX disabled ( only IP)
> - Routing ON (RIP)
> - Table user with only a user accont : romero, assigned 192.168.200.1
> ( dial
> out router), routing on, compresion on...
>
> The second one is configurated for only dial-out:
> - S1 and S2 port Dial-out
> - No table user
> - gateway 192.168.100.1( dial-in router )
> - IPX disabled ( only IP)
> - Routing ON (RIP)
> - Table location with only one account : romero, xxxxx, 232456, idle
> time=7
> minutes, destination 192.168.100.1 ( dial-in router), routing on,
> compression on......
> elicegui> elicegui> ifconfig
> ether0: flags=16<IP_UP,IPX_DOWN,BROADCAST>
> inet 192.168.200.1 netmask ffffff00 broadcast 192.168.200.255
> mtu 1500
> ptp3: flags=fd<IP_UP,IPX_DOWN,POINT_TO_POINT,COMPRESS,SUSPENDED>
> ???????????
> dest 192.168.100.1 netmask ffffff00 mtu 1500
> elicegui>
>
> Problem:
>
> - The dial out ( on-demand) router is all the time redialing to
> dial-in
> router. Why?
> The configuration is ok, all is ok so?
> There is not PC that could make external demands, and active the call
> !!
> Any idea?
>
>
> I hope you could help me.
>
> Thank you very much
>
> Best regards,
>
>
>
>
>
> Fernando Martin
> Interlinea2000
> http://www.i2000.es
> Voz:(943)-619101
> Fax:(943)-618159
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>