Now, can you tell ME how to make it work with a GTD-5 from AGCS - Line
side, E & M Wink Start...
Thansk
JOhn :}
At 11:32 AM 2/4/98 -0800, you wrote:
>Have the telco tweak the digital padding on the DMS-10.
>Here's the instructions that Kyle posted a while back.
>Fixed it for us. We get 40k to 46k on a DMS-10.
>
>Don
>
>================= post from Kyle
>
>Here it is, hot off the presses. After working with Livingston and
>Nortel, we have come up with the requirements to make it work.
>
>Of course I have to warn you, your mileage may vary.
>
>How to do 56k in a DMS-10 on CT1 E&M Wink Start
>
>Trunk to Line padding is hard set to 2db in a DMS-10.
>Trunk to Trunk padding should be set to 4db.
>Line to Trunk padding should be set to 0db.
>DNIS set to 1 digit. 0 digits does not seem to work properly.
>The translation is specifically DIOD in the switch.
>
>Kyle Platts
>Network Engineer
>!NTERPRISE Networking Services
>11/11/97
>*********** REPLY PARTITION ***********
>
>On 2/4/98, at 9:33 AM, Rick Kunze wrote:
>
>>Hi,
>>
>>I just (FINALLY) got my CT1 installed with one line on it for testing.
>>I've got a +2 to -7.5 level, ami encoding and d4 framing. The telco has a
>>DMS10 switch.
>>
>>I've got a couple of users testing this, but all I'm seeing are connect
>>speeds of 26 through 36. The highest is 36K.
>>
>>Anyone know of any solutions?
>
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Don Lashier dl@newportnet.com
>Newport Internet http://www.newportnet.com/
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>
>
John C. Lange, Sr. PALACE dot NET, INC.
microjl@palacenet.net MICRO-TECH Computers, Inc.
608.742.1601 & 6980 2800 New Pinery Road
http://www.palacenet.net/ Portage, WI 53901
Visit our online store @ http://www.microt.com/
Authorized iPSwitch WebVar @ http://www.microt.com/iPSwitch/index.html
--- __o
--- _-\<,_ Fastest Service in Town
--- (_)/ (_)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.