Yes.
>In my case, I need both line0 and line1 to service my dialups, but where
>do I connect my leased line? My understanding is that I get a external router
You cannot connect the leased line to the same PM-3 as both WAN ports are
being used for dialin. At least until we release the WAN card, which
adds a 3rd WAN port to the chassis.
>and plug that into the ethernet port on the PM3's. Will this work? Now
You will need another router for the leased line, yes.
>into the PM3. I'm wondering do I need another CSU for my leased line?
Of course.
>According to MegaZone, I cannot use a external CSU with the PM3.
Right - where are you going to connect it to the PM-3? There is no
V.35 port.
-MZ
-- Lucent Remote Access Division - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588 - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.