Ian M. Smith wrote:
>
> On Wed, 28 Jan 1998, Carl Rigney wrote:
> > [ Lastcall description ]
> >
> > Note that if circuits are available to the PortMaster 3 but no modems
> > are available, the PortMaster 3 will send a user busy signal back to
> > the Telco when another call comes in, which gives the user a busy
> > signal, instead of forwarding them to the next line in the hunt group.
> > The Telco may be able to configure the line for "forward when busy."
>
> Any plans on changing this behaviour in 3.8? GTE here charges per minute
> any forward on busy calls, so this option can get a bit expensive. I
> assume that if I have a portmaster that is first in my rotary and is full
> all the time, and I idle out 10 modems to swap the card that it will start
> giving busy signals?
>
> A very needed command, but could be better if it somehow could keep a
> line open after a disconnect or return a diffrent signal to the switch
> other than busy.
>
> --
> IanSmith@ncinter.net Visit Below!
> My HP48/Imagine/ImageMaster/FractalExtreme Page --> www.ian.org
> The best baseball simulation on the market! --> www.imonkey.com
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.