(PM) No logon on PM2E-30 Port (fwd)

MegaZone (megazone@livingston.com)
Wed, 28 Jan 1998 21:26:25 -0800 (PST)

Once upon a time Zak Wolfinger shaped the electrons to say...
>Can anyone help me diagnose this? I have a single port on
>my PM2E-30 that is acting strange. All ports go to Microcom
>ISPorte modems. All ports and modems are setup identically.
>On one port the modem answers but no username/password
>prompt is ever sent. If I attach to the port while dialed
>into that modem, I can send and receive text both
>directions.

Quintuple check the port config - expecially make sure flow control and
modem control are set right. (rts/cts and on)

Try swapping the cable - see if the problem follows the modem/cable or
the PM port.

-MZ

--
Lucent Remote Access Division - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.