> purchase (the MP/16 uses RJ45 connections). I did get the RJ45 to DB25
> connectors for the back of the PM2e.
These are not standard issue with the pm 2e AFAIK
>
> My situation: I am using a standard ethernet cable from the back of the
> MP/16 to the adaptor on the back of the MP/16. When I dial into the
> modems, they just scream. I have tried every init string I could find
> relating to these modems, from atf1s0=1&w on to much more detailed
> ones. The screaming would change, but not go away. They would never
> connect. I am able to attach to them from the PM2.
>
> I tried changing switch 10 on the back of the MP/16, (boots up with
> NVRAM or ROM), to no avail.
>
> So, I need to know:
>
> 1. Can I use regular RJ45 Ethernet cables between the MP/16 and the
> connectors on the back of the PM2?
If you can attach and do AT and get OK then you are fine.
> 2. How should I configure the MP/16 modems to make them work?
Need a modem string. Im sure someone on the list has one for the MP 16.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger ph:713-772-6690 Livingston Var
AMS, Inc. fx:713-774-3498 Medical Billing
8300 Bissonnet #400 jake@ams.com Internet Services
Houston, Texas 77074 www.ams.com/~jake Business Management
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.