On Wed, Jan 21, 1998 at 11:32:47PM +0000, James wrote:
> > we are running some PM2 and a bunch of PM3s. Now, since
> > a month or so, we are using a PM2 the first time for
> > modem dialin (the others before where only for ISDN and leased
> > lines). We are getting now this strange 'incompatible protocol'
> > message at this site for modem-dialin for many Win95 users.
[...]
> I think you will find that a PM2 running anything over ComOS 3.5 should
> have 4Mb RAM, and not 1Mb RAM. This is quite a cheap fix. Make sure you
> get good 30pins Parity chips though. Look in the Release notes that came
> with ComOS 3.7 if you don't believe me. Cheers
> >
> > PS: the PM2 is running ComOs 3.7.2, does have 5 BRIs, 10 serial-IF
> > and 1 MByte RAM ... something more thats important ?
> >
well ... we upgraded it to 4 MB RAM, but this error still exists.
Next time this happends I will try to do a ppp-trace.
Some other suggestions ? What else can I do ?
bye,
-Juergen-
-- CHOIN! HCT GmbH -- http://www.choin.net - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.