NOT a LE employee wrote:
>
> On Wed, 31 Dec 1997, Mischa Peters wrote:
>
> > Hi,
> >
> > What is going wrong?
> > Does the modem hang after the v8 tone, or does it stay in the handshake?
> >
> > You can try for starters to force a v42bis connection, probably at&f%c1\n4
> > or at&f%c2.
> > Or set the commatime at 1 second (ats8=1) anf put one comma at the end of
> > the dialstring.
> > And maybe as last resort force the modem one speed lower than it is capable,
> > so if it's a 33k6 modem force the speed at 31k2, you can do that with
> > atb<number> or with at+ms=11,1,31200,31200
> >
> > Hope you have some luck with it.
> >
> > Mischa
> >
> > > I have a customer who I can't seem to get connected. He said he has
> > > been on the phone with Zoom technicians and still can't connect to the PM3s.
> > > He has an internal Zoom 2819 ATI3 1.002K56.DLPAZ201 I can get him connected
> > > on analog USR courier v.everything modems on a PM2 at 26.4 or less but low
> > > through-put.
>
> As an update ... I just redid a computer for someone who has this modem...
>
> It will dial in to our PM3 ComOS 3.7.2 PRI at 31200 with the default
> setup...
>
> I'm still working on our padding issues...
>
> --
> Aloha from Paradise,
>
> Sherwood
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
--
***********************************************************
Ingrid Kast Fuller (ingrid@cityscope.net)
CityScope Net (http://www.cityscope.net) 1(713)477-6161
109 West Southmore, Pasadena, TX 77502-1001
***********************************************************
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.