You can try a "s202=32" magic number in the string. It sometimes helps bump
the speed a notch but doesn't help if real low speed)
Hyperterm screen capture:
Welcome to CityScope Net (56K/ISDN Lines)
login:+++
OK
ath
OK
at&v1
TERMINATION REASON.......... LOCAL REQUEST
LAST TX data rate........... 21600 BPS
HIGHEST TX data rate........ 21600 BPS
LAST RX data rate........... 40000 BPS
HIGHEST RX data rate........ 40000 BPS
Error correction PROTOCOL... LAPM
Data COMPRESSION............ V42Bis
Line QUALITY................ 036
Receive LEVEL............... 012
Highest SPX Receive State... FF
Highest SPX Transmit State.. 67
EQM Sum Value............... 00BA
RBS Pattern detected........ 2D
Data Rate Dropped in kbps... 06
Digital Pad Detected........ 6dB <--------see if you have one of
these
in your local call then have the phone co mess with the padding.
OK
Ed
RCIA <<Relatively Cheap Internet Access>>
Redmond, WA
-
>I'm am testing the new PM3 modems and most of my 56K modem users
>can not get over 31.2K. I have had only one beta tester get 44-46K.
>
>One is an Impression Rockwell 56K modem, the other is a Boca 56K,
>and the last is a Zoom 56K. I've captured the ModemLog.txt files
>and checked out the AT Strings. I've tried using different compression
>on the PM3 and used Van-Jac on the users file...
>
>Any other suggestions? Is it the telephone lines, the PM3 or what?
>
>--
>***********************************************************
> Ingrid Kast Fuller (ingrid@cityscope.net)
> CityScope Net (http://www.cityscope.net) 1(713)477-6161
> 109 West Southmore, Pasadena, TX 77502-1001
>***********************************************************
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.