Ok, I think we even have one of those in house.
>there anything to indicate that this is a DOV call other than the
>lack of an assigned modem? Also, the 3Com has a multilink feature to
Not really. They're handled like an ISDN user.
>bring up the 2nd B channel. When I place a call with it enabled, the
>second B comes up but hangs up after I'm verified. If I do a 'sho
>sxx" on the pm3, it does show 'multilink' on the protocol line. Do I
It would show multilink with the first line alone - it is negotiated even
with one channel to plan ahead. Then the second channel should get it too.
Can you do a PPP debug on the second channel connection to see if that
is failing somehow?
>have to add the 'max session' parameter to radius to enable this
You mean Port-Limit - and no. Unless you have 'Port-Limit = 1' now that
isn't an issue. If it is not set there is no limit by default.
>featute? Is it even possible to have 2 B's up on a DOV call to a pm3?
Yes, and more than 2.
-MZ
-- Lucent Remote Access Division - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588 - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.