>
> I have a pm3 handling my ISDN customers .. One new customer has 128K
> Dedicated and wants 2 Class C's routed to his Box ( He has his choice on
> what to use .. a Cisco 1604 OR a Kentrox SOHO). He dials in fine when
> using the IPShar or proxy (only getting 1 ip) , but when he dials in
> trying to assign his ether port on his ISDN router to one of the address
> I have routed to him, he looses routing all together . Is there something
> I should know about the PM3 when routing to a dialup port on it??
We are going to need a little bit more info. Are you assigning him one of
the IPs from one of the /24s to his router via RADIUS or another IP? Do
you have the correct "Framed-Route" entry in RADIUS for both /24s? Are
you sure that the two /24s are being routed to the PM3 correctly (i.e. do
a traceroute from outside your network to see this). What is the config
on his Cisco?
>
>
>
> Daniel HEnry
> Koyote Internet
----
Josh Richards - <jrichard@livingston.com>
Beta Engineer
Lucent Technologies (Remote Access Business Unit)
(previously Livingston Enterprises, Inc.)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.