We increased the bandwidth between the 2 clouds, and now we are having
extreamly slow access to the remote cloud. Every remote pop ( there are 6
of them ) has about a 20% packet loss and about a 4 second ping.
We have a cisco 2501 ( to be replace today with a 3640 ) and at the remote
sites are livingston PM2-ER's ( version 3.3.3 and 3.7.2 ). Everything has
been running fine for the last year and now this. I think it is a SWB
problem, but they say they are not discarding any packets and are not
seeing any CRC errors on the local loops.
Below are some snips of the config's. If you need anything else please let
me know.
cisco sub interface:
interface Serial0.4 point-to-point
description Potwin 384K Connection ( Witchita )
ip address 199.240.134.9 255.255.255.252
bandwidth 384
frame-relay interface-dlci 152
cisco frame pvc:
DLCI = 152, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.4
input pkts 657703 output pkts 643048 in bytes 66606951
out bytes 398251889 dropped pkts 0 in FECN pkts 1050
in BECN pkts 365846 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
pvc create time 1d14 last time pvc status changed 1d14
portmaster wan config: ( up for 179 days )
Status: ESTABLISHED
Input: 3098547598 Abort Errors: 0
Output: 1347126862 CRC Errors: 174
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 59
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 336K Ext Clock
Modem Control: on on
Local Address: potwinpm-wan.kansas.net potwinpm-wan.kansas.net
Netmask: 255.255.255.252 255.255.255.252
Interface: frmW1 (FRM,Quiet) (FRM,Quiet)
Mtu: 1500 0
Annex-D Poll: 10 (seconds)
DLCI List: 250:199.240.134.9
Dial Group: 0
Any help or suggestions are appriciated.
Jim Lund
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.