> Hello -
>
> For all the people that responded to my query about PAP/CHAP, thanks, I now
> have that working. However, I do have a problem remaining. The Livingston is
> configured for dial-on-demand. The remote system assigns an address each time
> a connection is established. So, the problem becomes, how do I convince the
> Livingston to use S0 blindly as the place to direct default routed packets,
> so that on-demand works, and dynamic addressing works?
You need to have the remote end assign the SAME address OR let your HOST
end assign the address. You set up a user AND a dialing location in BOTH
units with static ip's and if your routing is correct, then the
dial-on-demand will work properly for incoming AND outgoing traffic.
Weve done it before and it is ESPECIALLY nice for ISDN as on-demand ISDN
is hardly noticable as that. It looks contniuous.
Look in the config guide near the back. There are samples of exactly how
to do this.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400 fax: 713-774-3498
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.