We've just added a second partial PRI to our pm3: It intially had a 30-line
PRI connected to line0, and now has a PRI with only 5 lines enabled
connected to line1.
line0 shows the following:
---------------------- line0 - E1 Primary Rate ISDN ---------------
Status: UP F1 Framing: CRC4 Encoding: HDB3 PCM: a-law
Violations
-----------------------------
Bipolar 0
CRC4 2
E-bit 0
FAS bit 0
Line1 shows similarly:
---------------------- line1 - E1 Primary Rate ISDN ---------------
Status: UP F1 Framing: CRC4 Encoding: HDB3 PCM: a-law
Violations
-----------------------------
Bipolar 1
CRC4 2
E-bit 0
FAS bit 0
The problem being, how do I confirm that the additional 5 phone channels are
actually there and working. At present our service never reaches more than
20 lines in simultaenious use to this box. Any suggestions as to ways I can
force a call to come in over line1, or simulate traffic over the 30 lines of
line0 or somesuch?
Thanks
M.
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Mark O'Leary, | Voice: +44 (0161) 2756110 Network Support Officer, | Email: Mark.O'Leary@mcc.ac.uk Manchester Computing, UK | or: mark@mcc.ac.uk - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.