Increasing the pool size to 48 corrected the problem.
Bob
>We have a remote POP that's connected to our main site via a full
>DS1. Located there are several PM2s (3.7) with USR courier modemsand
>one PM3 (3.7.2 PRI 5ESS). We recently added a second PRI and modems
>to the PM3, and around the same time upgraded from 3.7.1c1 to 3.7.2.
>
>Since that time, we've been getting an inordinate number of customer
complaints from win 95 users that they cannot connect to the PM3
>(unable to negotiate a compatible set of protocols). Since the
>PM2s are on a separate hunt, the customers dial into that hunt &
>bingo, they connect just fine.
>
>All radius servers are at our central POP, so the remotes are
>authenticating via a DS1. Traffic on the link peaks at 396kbps,
>so we're not saturating the link at all.
>
>Has anyone else seen a problem like this? We're going to configure
>another radius server and place it at the site, but I don't think that I
want to just ignore this issue. MZ, any other similar complaints?
>
>Best regards,
>
>Bob Zachok
-------------------------
Robert M. Zachok, Atlantic Internet Technologies
rmz@exit109.com 628 Shrewsbury Ave.
(732) 758-0505 Red Bank, NJ 07701
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.