Re: (PM) PM3 upgrade Failure (fwd)

Joe Benson (joe@millcreek.net)
Mon, 10 Nov 1997 19:24:30 -0700 (MST)

>
> Once upon a time Joe Benson shaped the electrons to say...
> >Allready tried to use Pmconsole, it failed. That is why I tried to tftp.
> >Erase comos worked, didn't report any errors, but the system fails when
> >I try to load 3.7.2. from Pmconsole or tftp. The image file is about 2K
> >bigger, maybe there is a bad area in that 2k section.
>
> Start logging on UNIX and telnet in. 'set console' 'set debug 0x72'
>
> Then try again with the upgrade. That is a FLASH debug. If there is an
> error, it should show up.

Did that, it was in the first email I sent. This morning I called and got
an RMA number. Thought that I would try one more time to upgrade. I worked,
guess the RMA number scared it. Anyway it is up and running with 3.7.2, RMA
is on hold. We'll watch it for a few days and see if it is ok.

Thanks to all that responded, especially Alan Gatlin from Livingston.

Joe

>
> If there is, I'd open a support ticket and include the debug trace.
>
> -MZ
> --
> Livingston Enterprises - Chair, Department of Interstitial Affairs
> Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
> For support requests: support@livingston.com <http://www.livingston.com/>
> Snail mail: 4464 Willow Road, Pleasanton, CA 94588
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.