Thanks for the suggestions.
Jim...
-----Original Message-----
From: Jake Messinger [SMTP:jake@ams.com]
Sent: Sunday, November 09, 1997 12:26 AM
To: James E. Marker
Cc: 'portmaster-users@livingston.com'
Subject: Re: (PM) Can't Get Network Dial-In Modem to Connect.
On Sat, 8 Nov 1997, James E. Marker wrote:
> I have USR Sportster 33.6 modems hooked up to 2ER and 2E Portmasters.
I have tried everything I can think off to get them to connect and provide
network access. The modems hand at the CONNECTING stage. I have them
assigned to negotiated addresses, network dial-in, and have used a
variety of modem init strings.
Hrm, we "had" about 120 sportsters connected to PM 2's with NO probs. I
BET you might have a modem/port speed mismatch. Try "attaching" to a port,
then type at&f? (was it 1 or 2 for hardware flow? somebody remember me).
I want to say at&f2&d3&c1s0=1&w.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400 fax: 713-774-3498
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.