It's talking to the switch.
>
>> Look at the messages. Send is from the PM3 to telco, Recv is from
>> telco to pm3. No messages means you're not talking to the switch at
>> all (T's are down).
>
>Looks like Im talking to the switch.. why the heck cant they see me :(
>
Looks like a telco problem (provisioning, translations, etc)
>>
>> If you do a sh ses, and see NO SERVICE, yet you see the lines as
>> up, the telco needs to put the D channel in service. Talk to the
>> SSC (switching group) and not the carrier group.
>
>All channels show IDLE. Also I forgot to mention that I get a fast busy
when I call the main PRI phone number when the PM3 is plugged in.
>
Save all and power cycle. Have the telco check the D channel and
provisioning. Talk to the switching group and not the carrier group.
Who's your telco?
Doug