Yep, done this.. here is the sort of stuff I get:
D0: send 00 01 01 01=20
D0: recv 00 01 01 01=20
D1: send 00 01 01 31=20
D1: recv 00 01 01 01=20
I dont see any normal ISDN Debug messages (ive delt with pm2ei's =
before, so I know what they looked like there)
> Look at the messages. Send is from the PM3 to telco, Recv is =
from
> telco to pm3. No messages means you're not talking to the switch =
at
> all (T's are down).
Looks like Im talking to the switch.. why the heck cant they see =
me :(
>=20
> If you do a sh ses, and see NO SERVICE, yet you see the lines as
> up, the telco needs to put the D channel in service. Talk to the
> SSC (switching group) and not the carrier group.
All channels show IDLE. Also I forgot to mention that I get a =
fast busy when I call the main PRI phone number when the PM3 is =
plugged in.
-Scott=20
> Doug
>=20
>=20
> At 10:08 AM 8/27/97 -0400, kbethke@ezy.net wrote:
> >
> >Well I Just knew if I bought three of these things livingston =20=
> >would jump to my help when I needed it.. {sigh} Where else can =
you
> >buy $43k worth of equiptment and not get help.
> >
> >Perhaps this list will be the saving grace.
> >
> >Here's the situation. Ive got pm3-2t's with the new modem's, =20=
> >upgraded the comos, set them up to the best of my ability, went =
on
> >the LE webpage and went through the quick-start setup guide for
> >the PM3 to check myself and it looks like all is well:
> >
> >> sh line0
> >---------------------- line0 - T1 Primary Rate ISDN
> >---------------
> >
> > Status: UP Framing: ESF Encoding: B8ZS PCM: =
u-law
> >
> > Receive Level: +2dB to -7.5dB
> >
> > Alarms Violations
> > ----------------------------- ----------------------------- =
Blue
> > 0 Bipolar 0 Yellow 0 CRC Errors 0 Receive Carrier Loss 0
> > Multiframe Sync 0 Loss of Sync 0
> >
> >Telco claims they dont see any CPE, they can loop the smart =
jacks
> >but nothing is connected to it. Looks like my PM3 see's the =
telco
> >fine. Anyone have any idea what on earth the problem could be?
> >
> >Oh yea, plug in my As5200 to the same PRI's and all is well.. =
Can
> >PM3's handle PRI's yet? or is that in ComOS 3.8? :)
> >
> >-Scott
> >
> >---
> >GSTek Corporation *Kenneth Scott Bethke* Ezy.Net =
Corporation
> >Sun/Networking/ISP Stuff -- BUY/SELL/TRADE -- FAX: 410-742-1381
> >Email:kbethke@ezy.net Voice:410-742-1610
> >Web:http://www.ezy.net/gstek
> >
> >
>=20
>=20
--- GSTek Corporation *Kenneth Scott Bethke* Ezy.Net Corporation Sun/Networking/ISP Stuff -- BUY/SELL/TRADE -- FAX: = 410-742-1381 Email:kbethke@ezy.net Voice:410-742-1610 = Web:http://www.ezy.net/gstek