Re: PM3/ComOS 3.7/Lucent Cards: Connect Rates...

Stephen Zedalis (tintype@exis.net)
Fri, 22 Aug 1997 17:04:48 -0400 (EDT)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Alexander Morales: "Secondary name server"
Previous message: Mike Wade: "RE: Upgrade to 56k and 3.7 causing disconnects"
In reply to: Tim Flavin: "Re: Motorola Voice/ModemSURFR 56K modems"
Next in thread: Wayne Bouchard: "Re: PM3/ComOS 3.7/Lucent Cards: Connect Rates..."

Nope, that is right... The portmaster is transmitting 46K and the
Hayes is recieving 46K. The Hayes is transmitting 28.8 and the portmaster
is recieving 28.8. Neat how that works eh? You are polling the status
of the Portmaster modems not the users modem.

Take Care

Stephen Zedalis
System Administrator - Exis Net, Inc.

On Fri, 22 Aug 1997, Doug McClure wrote:

>I don't remember if this was brought up or not, but my PM3's are reporting
>a reversed connect speed for TX and RX with a sh mX command. Purely
>cosmetic, but it's still not right.
>
>sh m0
> State: ACTIVE
> Active Port: S1
> Transmit Rate: 46K
> Receive Rate: 28800
> Connection Type: DIRECT/NONE
> Chars Sent: 241195233
> Chars Received: 10484781
> Retrains: 0
> Renegotiations: 0
>
>
>BTW, this was with a Hayes Accura flashed with the beta code that was
>brought up yesterday.
>
>ati3
>V1.002HY-K56_DLS
>
>
>Doug
>

Next message: Alexander Morales: "Secondary name server"
Previous message: Mike Wade: "RE: Upgrade to 56k and 3.7 causing disconnects"
In reply to: Tim Flavin: "Re: Motorola Voice/ModemSURFR 56K modems"
Next in thread: Wayne Bouchard: "Re: PM3/ComOS 3.7/Lucent Cards: Connect Rates..."